Syi Large Diameter Centrifugal Supply Di Cast Tube K7 K8 K9 K10 K12 K14 Ductile Iron Drainage Pipe

Product Description

Centrifugal Cast Ductile Iron Tyton Push-in Joint Socket and Spigot Pipe ISO 2531 EN 545 EN598 For Water Or Sewerage Pipeline Projects

Description
SYI can supply the Centrifugally Cast Ductile Iron Tyton Push-in Joint Socket and Spigot Pipe according to ISO2531, EN545, EN598,from DN80 to DN2000, including K7, K8, K9, K10,K12, K14, C20, C25, C30, C40, C50, C64, C100, with the coating of Metallic Zinc(130-400g/m2), Zn-Al Alloy 85/15, Black Bitumen coating, Red/Blue Epoxy coating, Cement lining or PU (polyurethane) coating.

 

Centrifugally Cast Ductile Iron Pipe is a kind of pipe made from spherical graphite cast iron by centrifugal spinning process. The pipes, which can convey many fluid media such as water, oil and gas, are widely used in various pipeline projects for metallurgy, mine, water conservancy, petroleum and urban public service utility.

Push-in Flexible Joint (Tyton) can be assembled by pushing the spigot through the gasket in the socket of the mating component, and permits significant angular deflextion both during and after installation and which can accept a light offset of the centreline.

 

Own the advanced and competed set of equipments, such as the medium frequency induction furnace,
high-speed centrifugal casting machine, gas-cooling annealing, and automatic zinc spraying, hydraulic pressure testing, and lining with cement lines, SYI has an annual production capacity of 200000 tons since DN80 to DN2000, and it is still developing all the time.

Strict process and operating regulations together with perfect quality assurance system making every production step under control. All the products are subject to tests and inspections including composition analysis, metallographic examination,dimension & surface finish inspection, ring test, tensile test, hardness test, hydrostatic test, lining and coating test to be sure that the products meet the requirements of the standards.

Feature:
1.Possessing high strength, good toughness as steel and better corrosion resistance than steel. 2.Good straightness, even wall thickness, high dimension accuracy, smooth surface finishing and remarkable mechanical properties, plus with firmly sticking internal & external coating layer. 3.Flexible Push-in joint and rubber gasket are used resulting in convenient installation of pipelines.
Production Process
Quality Control
Transportation
Transporting:

1.DN80-DN300: Usually by bundles;

2.DN350-DN2000: Usually by bulk;

3.During transportation, the pipes are fixed by timbers, blocks, nails & steel ropes with cushions at the side in possible moving directions;

4.Bulk or containers for shipment, and trucks or train for inland transport.

Government Audits
Company