Pipeline Product ISO 2531 En 545 En598 Metallic Zinc Coating Ductile Iron Flanged Pipe Factory

• Customization: Available
• Material: PVC Pipe
• Temperature Classification: Low Temperature Piping
• Model NO.: Flanged pipe
• MPa Classfication: Low Pressure Piping
• Standard: ASTM, GB, API, DIN, JIS
• Diameter: >720mm
• Medium: Fluids With Solid Particle
• Cross-Section Shape: Round
• Connection Type: Welding
• Transport Package: Wooden Box
• Specification: ISO 2531 EN 545 EN598
• Trademark: SYI
• Origin: China
• Production Capacity: 200 Ton/ Month

Product Description

 

Ductile Iron Flanged Pipe with Cast-on or Screwed-on or Weld-on Flange ISO 2531 EN 545 EN598

Description
SYI can supply the Flanged Pipe with Cast-on or Screwed-on or Weld-on Flange PN10, PN16, PN25 or PN40 drilling in accordance with ISO 7005-2/EN1092-2, from DN80 to DN2000, with the coating of Metallic Zinc (130-400g/m2), Black Bitumen coating, Red/Blue Epoxy coating, Cement lining or PU (polyurethane) coating.

Mechanical properties

Nominal Size DN	Minimum tensile strength, Rm Mpa	Minimum 0.2% proof stress, Rp0.2 Mpa	Minimum elongation after fracture,A %	Hardness HB
80-1000	≥420	≥300	≥10	≤230
1100-2600			≥7
Note: 1. By agreement between manufacture and purchaser, the 0.2% proof stress (Rp0.2) may be measured. It shall be not less than: · 270 MPa when A≥12% for DN 40 to DN 1000 or A≥10% for DN >1000; · 300 MPa in other cases. 2. DN 40 to DN 1000, the minimum elongation after fracture shall be 7% for thickness classes over K12.

Works test pressure

Nominal Size DN	Hydrostatic works test pressure bar
80-300	50
350-600	40
700-1000	32
1200-2000	25
2200-2600	18

Thickness of cement lining

DN	Nominal value	Tolerance 1)	Maximum crack width and radial displacement
80-300	4	-1.5	0.4
350-600	5	-2	0.5
700-1200	6	-2.5	0.6
1400-2000	9	-3	0.8
1)A negative tolerance only is given. Note: Pipe end may have a chamfer of maximum length 50 mm.

 

 

Dimensions in milimeters
Flanged Pipe with Cast-on or Screwed-on or Weld-on Flange Dimensions of flanges are in conformity with ISO 7005-2 and EN1092-2.	DN	Iron Wall Thickness
		K9	K12	K14
	80	6	7	8.1
	100	6	7.2	8.4
	125	6	7.5	8.8
	150	6	7.8	9.1
	200	6.3	8.4	9.8
	250	6.8	9	10.5
	300	7.2	9.6	11.2
	350	7.7	10.2	11.9
	400	8.1	10.8	12.6
	450	8.6	11.4	13.3
	500	9	12	14
	600	9.9	13.2	15.4
	700	10.8	14.4	16.8
	800	11.7	15.6	18.2
	900	12.6	16.8	19.6
	1000	13.5	18	21
	1100	14.4	19.2	22.4
	1200	15.3	20.4	23.8
	1400	17.1	22.8	26.6
	1500	18	24	28
	1600	18.9	25.2	29.4
	1800	20.7	27.6	32.2
	2000	22.5	30	35
	2100		31.2	36.4
	2200	24.3	32.4	37.8
	2400	26.1	34.8	40.6
	2600	27.9	37.2	43.4

Metallic zinc coating
When metallic zinc spray is applied, the mean mass of the zinc per unit area shall be not less than 130g/m2 ,
with a local minimum of 110 g/m2. The mass of the zinc according to customer's request is also available.
Bitumen coating

The mean thickness of bitumen coating shall be not less than 70 μm and local minimum thickness shall be
not less than 50 μm. The thickness of bitumen coating according to the customer's request is also available.
Alternative coating

a) External coatings:
- Metallic zinc with finishing layer, in accordance with ISO 8179-1;
- Zinc rich paint with finishing layer, in accordance with ISO 8179-2;
- Epoxy coating, in accordance with EN 14901;
- Polyethylene sleeve, in accordance with ISO 8180;
- Alloy of zinc and aluminum with or without other metals, having a minimum mass of 400 g/m2, with finishing layer;
- Extruded polyethylene coating in accordance with EN 14628;
- Polyurethane coating in accordance with EN 15189;
- Cement mortar coating in accordance with EN 15542;
- Adhesive tape;

b) Internal coating (linings):
- Portland/Blast furnace slag/Sulphate/ High Aluminum Cement Mortar, in accordance with ISO 4179;
- Cement mortar lining with seal coat, in accordance with ISO 16132;
- Epoxy coating, in accordance with EN 14901;
- Polyurethane lining in accordance with EN 15655;

c) Coating of the joint area:
- Epoxy coating;
- Polyurethane coating.

SYI Project

Government Audits
Company