Grey Russian Standard DN50-DN300 Flanged Ends Cast Steel GOST Gate Valve

• Customization: Available
• Media: Water
• Temperature: High Temperature
• Model NO.: Gost gate valve
• Material: Cast Steel
• Connection Form: Flange
• Pressure: Pn10 / Pn16
• Actuator: Pneumatic
• Thread Position of Valve Rod: Inside Gate Valve
• Usage: Safety, Flow Control
• Application: Industrial Usage, Water Industrial Usage
• Product: GOST Gate Valve
• Keyword: Gate Valve
• Design and Manufacture: Russian Standard
• Working Pressure: Pn10 / Pn16
• Size: DN50-DN300
• Transport Package: Standard Export Package or as Per Your Requirement
• Trademark: SYI
• Origin: China
• Production Capacity: 1000 Sets Per Months

Product Description

Grey Russian Standard GOST Gate Valve

STANDARD
Techinical Specifications:
Design and manufacture: Russian Standard
Working pressure: PN10 / PN16
Main Parts and Material:

Item	Part Name	Material
1	Body	WCB
2	Disc	WCB+2Cr13
3	Bonnet	WCB
4	Stem	2Cr13

Main Dimensions:

Unit: mm

DN	50	80	100	150	200	250	300
D	160	195	215	280	335	405	460
L	180	210	230	280	330	450	500

For other sizes not mentioned above, please contact us.We have right to change the data without further notice.

Cast steel gate valve can only be fully opened and closed, but can not be adjusted and throttled.

The advantages of Cast Steel Gate Valve: fluid resistance is small, the sealing surface is subjected to small media erosion
corrosion. It saves effort to open and close. Medium flow direction is not restricted, no turbulence, no pressure reduction.
Simple structure, short structure length, good manufacturing technology, high temperature and high pressure resistance of optional materials, a wide range of application.

Cast Steel Gate Valve Installation:
1. Check the valve cavity and sealing surface and other parts before installation, no dirt or sand particles attached;
2. Bolts at all connection parts should be tightened evenly;
3. Check the packing parts to ensure the sealing of the packing and flexible opening of the gate;
4. Before installing the Cast Steel Gate Valve, the user must check the valve model, connection size and pay attention to the medium flow to ensure consistency with the valve requirements;
5. When installing Cast Steel Gate Valve, the user must reserve the necessary space for the valve drive;
6. Wiring of the driving device shall be carried out according to the circuit diagram;
7. The Cast Steel Gate Valvemust be maintained regularly. Collision and extrusion are not allowed, so as not to affect the seal.
 

Note:
1) The installation position, height and import and export direction must meet the design requirements, and the connection should be firm and close.
2) The handle of all kinds of manual valves installed on the insulation pipeline shall not be downward.
3) The appearance inspection must be carried out before installation of the valve, and the nameplate of the valve should comply with the provisions of the current national standard "General Valve Mark" GB 12220. For the valve whose working pressure is greater than 1.0 Mpa and plays a cutting role on the main pipe, the strength and tight performance test should be carried out before installation, and the qualified rear can be used. During the strength test, the test pressure is 1.5 times of the nominal pressure, and the duration is not less than 5min. The valve shell and packing should be qualified without leakage. When the tightness test, the test pressure is 1.1 times of the nominal pressure; The test pressure shall meet the requirements of GB 50243 standard during the test duration, and no leakage on the sealing surface of the valve disc shall be regarded as qualified.

Remark:
* Handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is strictly prohibited.
* Double disc gate valves shall be installed vertically (i.e. stem in vertical position with handwheel at top).
* Gate valves with bypass valves should be opened before opening (to balance inlet and outlet pressure difference and reduce opening force).
* Gate valves with drive mechanism shall be installed according to the instructions of the product.
* Lubricate the valve at least once a month if it is used frequently on/off.

Package


Usually packed by plywood crates or pallets.

For correct Transporting operation, please also refer to:
It is important to apply a few simple chocking and lashing rules to minimize the risks of incident during transport.
Vehicles must be suitable for the transport, loading and uploading of ductile iron pipes and fittings. Apply the following basic rules:
-Prevent any contact between the valve elements and metal surfaces (to avoid damaging the coatings).
-Make sure the valves do not come into direct contact with the trailer floor (store the pipes horizontally by placing two parallel rows of good quality wooden planks fastened to the floor).
-Make sure that the valves can be loaded and unloaded in complete safety.
-Make sure that the load is secure during transport.
-Always use vehicles or trailers with sufficiently large stanchions fitted on each side of the floor to stabilize the load.
-Lash the load with textile straps and lever tensioners.

Company Profile